For a forward or flyback converter, pins 9 and 10 drive a low-side MOSFET; pins 11 and 12 (if used) drive a synchronous rectifier. The schematic typically shows resistors (10-50Ω) in series with each gate to dampen ringing.
Pin5 COMP ---[10k] + [0.01µF] in series --- Pin6 FB (loop compensation) Rm1-2316 Schematic
Pin 8 connects to a capacitor (1 μF to 10 μF) to slowly ramp up duty cycle at startup. Pin 16 (SYNC) is often left unconnected but can accept an external TTL clock to synchronize multiple converters. 4. Complete Application Schematic (Outer Circuit) Below is the textual reconstruction of a typical Rm1-2316-based flyback power supply as found in an HP spectrum analyzer: For a forward or flyback converter, pins 9