Install the software to C:\Icom\CS2200 instead of C:\Program Files (x86) , as older software struggles with spaces in directory paths.
Turn off the IC-2200H. Plug the cable into the DATA port. Hold down the ‘V/Mhz’ button on the radio face. While holding it, turn on the radio power. The screen will go blank or show "CLONE." This places the radio in programming mode. Now click "Write" in the CS-2200 software. Manual Programming vs. CS-2200: A Head-to-Head | Feature | Manual (Front Panel) | CS-2200 Software | | :--- | :--- | :--- | | Time for 200 channels | 4+ hours | 15 minutes | | Alpha tags | Painful multi-click menu | Type directly | | Odd splits | Not supported | Fully supported | | Backup | Impossible | Save .icf file to PC | | Error rate | High (missed tones) | Zero (validated fields) | | Cost | $0 | ~$40 (if found) | Troubleshooting Common CS-2200 Errors Even with the right gear, you may hit a wall. Here are the three most common issues and fixes: CS-2200 Icom IC-2200H Programming Software
Do not double-click setup.exe yet. Right-click the file > Properties > Compatibility tab. Check "Run this program in compatibility mode for" and select Windows XP (Service Pack 3) . Also check "Run as Administrator." Install the software to C:\Icom\CS2200 instead of C:\Program
Open Device Manager on your PC. Find your USB serial cable. Note the COM port number (e.g., COM5). Open the CS-2200 software. Go to Settings > Communications Port and change it to match (e.g., COM5). Set speed to 9600 baud . Hold down the ‘V/Mhz’ button on the radio face
Since Icom has discontinued it, you will likely find the CS-2200 on user forums (QRZ.com, eHam), eBay CDs, or archive.org. The file is usually a ZIP containing setup.exe .
Icom’s OPC-478 programming cable. This is a genuine RS-232 (serial) cable. The problem? Modern computers don’t have serial ports.